| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Weissenborn - size? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=6459 |
Page 1 of 1 |
| Author: | Jim Kirby [ Mon May 01, 2006 9:44 pm ] |
| Post subject: | |
Hi - does anyone know off the top of their head what the needed sized for back and side plates are for a Weissenborn? TIA |
|
| Author: | PaddyD [ Mon May 01, 2006 10:33 pm ] |
| Post subject: | |
hi jim, i have ben think about building a weissenborn for a while, this is one of the most useful websites i have found weiisenborn in terms of wood size, i think 34x15 for the top/back, and 40x4 for sides, but thats off the top of my head so dont take as gospel!! good luck paddy |
|
| Author: | Aust Tonewoods [ Tue May 02, 2006 2:21 am ] |
| Post subject: | |
Hi Jim, You might want to make the back and tops set a little larger for standard weissenborn. Back set 34" x 16" and 42" x 3.5" regards Tim |
|
| Author: | Mike Dotson [ Tue May 02, 2006 2:40 am ] |
| Post subject: | |
What Tim said. There's a wood discussion over in the reso section too. |
|
| Author: | Jim Kirby [ Tue May 02, 2006 5:45 am ] |
| Post subject: | |
Thnaks everyone. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|